Dawn Inside Mount
Cornice Kits

Instead of three contoured surfaces, as is on the Avalon cornice face, the Dawn has one contoured surface.

The Dawn Cornice is offered in 9", 12", and 15" drop (height) in any width that you need (up to 50’).

• The 9" Dawn Cornice looks great on small bathroom & kitchen windows. They are also popular for children’s rooms.
• The 12" Dawn Cornice looks great on standard size windows and over sliding glass doors.
• The 15" Dawn Cornice looks wonderful on very wide windows or in rooms with very tall ceilings.

Here's an easy way to determine what drop works best for you, using a regular 8½ X 11 sheet of paper.

• Have someone hold the paper lengthwise so that the longest side of the paper runs the length of your opening. They'll probably need to use a step stool or ladder to hold the paper in the approximate location where the finished cornice would go. From across the room, you would observe how it looks. This simulates our 9" drop cornice.
• Next have them rotate the paper so that it's up and down like you would normally use it. This simulates our 12" drop cornice. Does this look better than the 9" drop, or does it still look to small?
• If this way is too big, you'll want to order our 9" cornice kit. If this looks just right, you'll want to order our 12" cornice kit. If this is still looks too small, then you'll want to order our 15" cornice kit.

Mount the short side of two L-brackets on the side walls or cabinets so that the long sides fit into the groves on the back side of the cornice.

The top bracket should have the short side of the "L" pointing down, and the bottom bracket should have the short side of the "L" pointing up.

After covering, push the groves at the end of the cornice onto the L-Brackets.



Each Inside Mount Cornice includes:

• 4- L-Brackets
• screws and anchors
• tuck tool
• set of complete, easy to read instructions
• the appropriate number of extensions to achieve your length
• Inside Mount Cornices longer than 64 inches may require additional support to prevent sagging, and will include 3" or 5" brackets.